Electronic torque wrenches DAZ-TA and DAZ-TA PRO with integrated angle measurement system, Torque range from 2-800Nm

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display.Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA 100 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 2 - 100 Nm CAL. MEASURING RANGE: 10 - 100 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer.

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 420 mm TYPE: DAZ-TA 250 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 2 - 250 Nm CAL. MEASURING RANGE: 25 - 250 Nm WEIGTH: 1040 g interface (RS232) for PC and/or serial printer.

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 580 mm TYPE: DAZ-TA 350 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 5 - 350 Nm CAL. MEASURING RANGE: 35 - 350 Nm WEIGTH: 1580 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA 50 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 1 - 50 Nm CAL. MEASURING RANGE: 5 - 50 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 736 mm TYPE: DAZ-TA 500 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 10 - 500 Nm CAL. MEASURING RANGE: 50 - 500 Nm WEIGTH: 3000 g interface (RS232) for PC and/or serial printer.Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings.Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 1237 mm TYPE: DAZ-TA 800 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 20 - 800 Nm CAL. MEASURING RANGE: 80 - 800 Nm WEIGTH: 5720 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA PRO 100 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 2 - 100 Nm CAL. MEASURING RANGE: 10 - 100 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 420 mm TYPE: DAZ-TA PRO 250 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 2 - 250 Nm CAL. MEASURING RANGE: 25 - 250 Nm WEIGTH: 1000 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display.Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions.Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 580 mm TYPE: DAZ-TA PRO 350 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 5 - 350 Nm CAL. MEASURING RANGE: 35 - 350 Nm WEIGTH: 1600 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode. priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA PRO 50 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 1 - 50 Nm CAL. MEASURING RANGE: 5 - 50 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer.Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode. priority torque, priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 736 mm TYPE: DAZ-TA PRO 500 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 10 - 500 Nm CAL. MEASURING RANGE: 50 - 500 Nm WEIGTH: 3080 g interface (RS232) for PC and/or serial printer.Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode. priority torque, priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 1237 mm TYPE: DAZ-TA PRO 800 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 20 - 800 Nm CAL. MEASURING RANGE: 80 - 800 Nm WEIGTH: 5810 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface