Type DIN 3127/ISO 2351, L=70 mm

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 420 mm TYPE: DAZ-TA PRO 250 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 2 - 250 Nm CAL. MEASURING RANGE: 25 - 250 Nm WEIGTH: 1000 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

D = 4.0 mm, Total length = 75 mm

Gun Metal Finish

d1 x d2 = 10 x 19, L=32 mm

d1 x d2 = 10.5 x 19, L=32 mm

d1 x d2 = 22 x 22, L=80 mm, similar DIN 3129